产品详情
NEOFLON FEP NP-112 Daikin 聚全氟乙丙烯（氟化乙烯丙烯共聚物）
FEP
Daikin FEP (Fluorinated Ethylene Propylene copolymer) is a melt processible fluoropolymer. Although it is lower melting than PTFE, it still maintains a continuous service temperature of 200 Deg C. Because FEP is fully fluorinated like PTFE, it is extremely inert, has excellent electrical properties, high chemical stability, low friction, excellent long term weathering and very good low temperature properties. It is used in high speed wire insulation, cable jacketing, extruded film, blown film, sheet extrusion, tubing, heat shrinkable tubing, catheters, molded parts, and equipment and pipe linings. Daikin provides a wide range of melt flow indexes to choose from, as well as standard copolymer grades and modified copolymer grades that have improved mechanical properties.
FEP 产品手册
NP-20
NP-30
NP-40
NP-101
NP-102
NP-112
NP-120
NP-130
NP-1108
NP-1109
NP-3180
Fluoropolymers
Fluoropolymers are widely used in automotives, aerospace, semiconductors, electronics and common household appliances because of their unique non-adhesive and low friction properties as well as their superior heat, chemical and weather resistance and superior electrical properties compared with the other polymers.
NEOFLON FEP NP-112 Daikin 聚全氟乙丙烯（氟化乙烯丙烯共聚物）
FEP（氟化乙烯丙烯）树脂的形态呈颗粒状，专用于增强涂层、热熔挤出和浸渍应用。它们还可用于传统的热熔挤出工艺和注塑、模压、传递模塑和吹塑工艺。
加工
较高的熔体强度和出色的涂布能力，有利于使用大型模具和涂布机床来提高生产率。使用具有更大长径比的挤出机料筒，可以提供足够的停留时间来熔化这些高温聚合物，从而满足高的生产效率。往复螺杆式注塑机最为高效。建议制造商采用耐腐蚀金属制造可能与熔融树脂接触的所有设备部件。
FEP 树脂具有卓越的耐化学腐蚀性和电气性能，并且适用于高达 200℃ (392°F) 的工作温度。Teflon™ FEP 树脂还具有独特的阻燃性和领先的低温韧性。
注意事项：
应避免在高于420℃时加工，以防分解产生有毒气体。
包装、运输、贮存：
1、封装在两层塑料内袋中，每袋净重25kg，每袋均附有合格证。
2、应贮存在清洁、干燥、阴凉、避光的环境中，防止杂质混入。
3、无毒、不燃、不爆、无腐蚀，按非危险品运输。
